HONEYCOMBS
Form for the manufacture of 3d panels
3d tile is universal for interior and exterior. It can be used for finishing walls, ceilings, columns and other architectural structures. Wall panels made of gypsum will make your interior individual and refined.
At us you can buy forms from ABS plastic and independently make 3d panels from gypsum or concrete.
How to make 3d panels?
1. Not necessary (but recommended). Make a frame (wooden is ok) under the mold so that you can tightly fix your mold on the surface.
2. Lubricate the mold (especially in deep places and corners). You can use special greases or something like vaseline (petrolatum).
3. Make mixture with ratio shown in the spreadsheet at the top and fill the mold. Tap the mold slightly several times to remove air from mixture.
4. After about 3-5 min you can feel that plaster got warmer, after this wait about 15 min and bend the edges one by one, carefully turn the mold upside down and take it off from panel.
5. Look at the panel edges and remove bevels with putty knife if they appeared.
6. Leave panel to dry in a warm place (face side down or in vertical position).
7. Also you can already mount them on wall without waiting for drying because gypsum does not shrink.
Form characteristics
Size: 21.7x21.7 in (550x550mm)
Weight: 1.2 lb (0,55kg)
Material: ABS plastic
Number of fills: 200+
We recommend using gypsum for casting G-10, G-15, G-16, the ratio of 4.4lb (2 kg) of gypsum to 1 liter of water.
Finished panel parameters:
The size is 19.7x20.9 in. (500x530mm)
Thickness of the product 0.4-0.8 in (10-20 mm)
The area of 1 panel is 387 in² (0.25 м²)
The approximate consumption of gypsum for 1 panels is 8.8-13.2 lb / pc. (4-6 kg/1pcs)
Are you creative, will you like to make your own molds or have some great ideas you would like to explore will this is your chance. This listing is for food grade silicone putty to make your own molds.
Size is 1 lb
Easy to use, mix ratio 1:1 equal parts
A + B = Creativity
Instructions will be included with the purchase
This mold is made with a FDA food grade putty which is made of a non toxic material and it complies with FDA 21 CFR 177.2600.
This mold can be utilized for making all kinds of arts and crafts like jewelry and magnets using polymer clays, paper clays, sculpey, resin, premo and fimo. Please remember that if you use you mold with polymer clays or resins do not use it with food to avoid contamination. Let your imagination run and create beautiful pieces. Make your item out of resin or clay and decorate your phone, make cards, scrap booking make jewelry you name it the possibilities are endless.
The mold can be also used to make candy, chocolates, ice, fondant and appliqués make that beautiful elegant or funny cake you always wanted
This super flexible mold is so easy to use that you do not need a released agent.
The mold can withstand temperatures up to 395 degrees so it can be put in the oven to bake your pieces.
To clean your mold just wash your mold with soap and warm water and let air dry.
International Buyers
Shipping is done on a daily basis. Friday afternoon items get processed on Monday morning. No shipping is done on the weekends. International buyers please be aware that delivery times depends on the country and it also depends on how long your countries customs takes to clear the packages. Please allow 3 to 5 weeks for delivery of international items. All international items are insured, if the item you purchased happens to get lost in transit then we can file a claim for a full refund plus the shipping charge after 45 days of it being shipped.
Track Page Views With
Auctiva's FREE Counter